DG-CP200PA3

This LED canopy light has an extremely thin profile constructed of rugged cast aluminum. Widely used in construction gas station lighting,petroleum canopies lighting,CNG fueling stations lighting, low-medium bay general lighting and so on.

Rated power: 200W

Rated voltage: 100-277VAC / 277-480VAC / 50/60Hz

Driver Power factory: ≥0.95

Driver Efficiency: >0.88

LED Type:  SMD LED 3030 / SMD LED 5050

CRI: Ra>70

Efficacy: 130-170lm/W

Beam angle: 120°

IP Rating: IP65

Installations: Poles / Brackets

  • Product Details
  • Data Download
  • DG-CP200PA


    DG-CP200PA3


          1.   The surface electrostatic spraying, anti-acid coating anti-aging, silicone rubber seal, moisture, high temperature. Dust-proof and                             waterproof to withstand damaging effects of outdoor environments.

          2.  High luminous efficiency High quality power supply, input voltage 100-240V. The power efficiency is more than 90%, power factor                       greater than 0.98.

          3.  The whole lamp with the powder coating is brighter, without fading and corrosion.

          4.  Impact Resistance, Shock-proof, Without Ultraviolet (UV) and Infrared (IR) Radiation: No filament and glass frames, avoid break of the                    traditional lamp,without harm to the human body.

          5. The unit construction of lamp adopt waterproof and dustproof design, the extra accessories can be install in ceiling mounted and bracket              projection-type. It can meet the indoor and outdoor needs and other different application areas.


    DG-CP200PA3


    DG-CP200PA


    DG-CP200PA3


                           Par  NO

    Parameter

    DG-CP200PA3

    DG-CP200NA3

    DG-CP200WA3

    Sysem consumption

    ≤202W

    ≤202W

    ≤202W

    Color Temperature(CCT)

    5000-6500k

    4000-4500k

    2700-3200k

    Luminous Flux

    26000 lm

    25000 lm

    23000 lm

    Lumious efficiency

    130   LM/W

    125   LM/W

    115   LM/W

    System Efficiency

    90%

    90%

    90%

    Beam Angle

    120°

    120°

     120°

    LED type

    LUXEON 3030   / OTHER

    LUXEON 3030   / OTHER

    LUXEON 3030   / OTHER

    LED QTY

    280

    280

    280

    Color Rendering Index(Ra)

    70

    70

    70

    Working Temperature

    -20 ~ 50 ℃

    -20 ~ 50 ℃

    -20 ~ 50 ℃

    Product Size

    540X540   X67 mm

    540X540   X67 mm

    540X540   X67 mm


    DG-CP200PA3


    DG-CP200PA3


    DG-CP200PA3


    DG-CP200PA3


    DG-CP200PA3


     Installation Instruction


      (1MOUNTING WITH PIPE OF INSTALLATION:

    DG-CP200PA3


                       

                      STEP1:

                                Feed the luminaire leads through the Stem and attach Stem

                               to luminaire by threading the stem into the threaded hub.

                    

                      STEP2:

                                Assemble the junction box to the Stem by placing one of

                                the conduit nut onto stem.

                   

                      STEP3:

                                 Loosen,do not remove,junction box screw and flip junction


                               box cover up.Place the junction box onto the stem.

                      

                      STEP4:

                                  Place the second conduit nut on to the stem from inside

                               The junction box and tighten the nut.

                     

                      STEP5:

                                  Connect the wires correctly and make sure the good wire

                               protection.

                     

                      STEP6:

                                  Sealed by water proof glue between fixture and pole.






               

           (2SURFACE OF INSTALLATION:


    DG-CP200PA

                      *Make sure that the ceiling can support the weight of the lamp.


                      STEP1:

                              Openings one hole greater than 40-50mm through hole in the

                            ceiling.


                      STEP2:

                              Put the fixture on the ceiling, make four marks according to 4

                            mounting kits, then drill 4 holes for them.



                               STEP3:


                              Connect the wires correctly and make sure the good wire

                            protection.


                     STEP4:

                              Get rubber plugs into the holes, match 4 mounting kits to the

                            Rubber plugs, then fix the fixture on the ceilling by screws.

                            Ensure that no wires are pinched during instalation of luminaire.


                     STEP5:

                               After installation, sealed by waterproof glue between fixture

                               and the mounting surface.



    DG-CP200PA3


          (3RECESSED OF INSTALLATION:

              

                     STEP1:

                            Open a 510 * 260 mm through hole on the ceiling.  

                  

                     STEP2:

                            Use included screws to attach mounting brackets to luminaire.

                 

                     STEP3:

                           The luminaire Recessed canopy,Use screws to attach mounting brackets.

                 

                     STEP4:

                           Connect the wires correctly and make sure the good wire protection.



    AEH油站灯200-240W开孔安装示意图-1110.png




Contact Us

Add:

5/F, Building A, ZhiXuanHan Industrial Park, YuanLing Rd, ShiYan Town,BaoAn District, ShenZhen, Guangdong, China

Tel:

+86 13425165870

Email:

info@dgalux.com

Message Board

Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号

Technical Support:DIGUAN