1.  Ultra slim design, fashion and classic. Full aluminum whole lamp radiator technology, pefect efficiently solve the                   problem of the led heat dissipation, greatly extend the life of the light source.

      2.   Innovative G-buckle technology, stop glass detaching, free of screw fixing, elegant appearance, easy to install.

      3.  Large size aluminum PCB fit die-casting aluminum housing,  reflector and heat sink integrated.

      4.  Stainless waterproof connectors for input cable connection, IP65 waterproof, shock resistant fixture,can be widely                 used as landscape lighting outdoor for building,villa,bridge, gardens,hotels,museum.

      5.  Explosion-proof glass, high light transmittance rate and good protect LEDs.

      6.  The client can choose lumen brightness,CRI and CCT,the maximum luminous efficiency of up to 170lm/W.

 Installation(Suspended ceiling installation\Horizontal installation\Vertical installation\Any angle installation)

         Step1. Ensure all power disconnected and turn off the power switch.

         Step2. According to the dimension of bracket hole,drill the holes on the mounting surface and enable it to support

     over 3 times weight of the lamp. Install the expansion screw,then lock the screws.

         Step3. Loosen screws,adjust the bracket to appropriate angle and then lock screws.

         Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.

         Step5. Switch on the power, the lamp will light on. Refer to the figure below.