LED Flood Light 100W

The LED Flood light can be wall mounted and ground mounted, which can be widely used for garden, garage, landscape, court, lawn, patio, warehouse, workshop, barn, pathway, sign, flag, etc.

Rated power: 100W

Rated voltage: 120-347 VAC  /  50/60Hz

Driver Power factory: ≥0.95

Driver Efficiency: >0.88

LED Type: SMD3030 1W High Brightness LED

CRI: Ra>70

Efficacy: 150LM/W

IP Rating: IP65(Waterproof)

Installations: Bracket Mount

  • Product Details
  • Data Download
  • DG-FL200PC


           1.  Ultra slim design, fashion and classic. Full aluminum whole lamp radiator technology, pefect efficiently solve the                   problem of the led heat dissipation, greatly extend the life of the light source.

          2.  Innovative G-buckle technology, stop glass detaching, free of screw fixing, elegant appearance, easy to install.

          3.  Large size aluminum PCB fit die-casting aluminum housing,  reflector and heat sink integrated.

          4.  Uses high thermal conductivity aluminum plate, reducing the temperature difference between light source and                     radiator,improve reliability.

          5.  Stainless waterproof connectors for input cable connection, IP65 waterproof, shock resistant fixture,can be widely                 used as landscape lighting outdoor for building,villa,bridge, gardens,hotels,museum.

          6.  Explosion-proof glass, high light transmittance rate and good protect LEDs.


    DG-FL200PC


    image.png


    DG-FL200PC


    Power(Wattage)30W
    50W 80W 100W
    Lumen4500LM7500LM12000LM15000LM
    Input VoltageAC120-347V
    Frequency Range50Hz/60Hz
    Color Temperature3000K/4000K/5000K/6500K
    IP RateIP65 (WATERPROOF)
    ShapeSquare




    DG-FL200PC


    DG-FL200PC


    DG-FL200PC


     Installation(Suspended ceiling installation\Horizontal installation\Vertical installation\Any angle installation)


    DG-FL200PC

     

             Step1. Ensure all power disconnected and turn off the power switch.

             Step2. According to the dimension of bracket hole,drill the holes on the mounting surface and enable it to support

         over 3 times weight of the lamp. Install the expansion screw,then lock the screws.

             Step3. Loosen screws,adjust the bracket to appropriate angle and then lock screws.

             Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.

             Step5. Switch on the power, the lamp will light on. Refer to the figure below.

      

    DG-FL200PC



Contact Us

Add:

3F,9th Building, Yuanling Industrial Park, YuanLing Rd, ShiYan Town,BaoAn District, ShenZhen, Guangdong, China

Tel:

+86 13425165870

Email:

info@dgalux.com

Message Board

Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号

Technical Support:DIGUAN