LED Stadium Light can be used in parallel with multiple modules, widely used in tennis court, sports venue,gymnasium, large stadiums,plaza,park, garden, building facade,plaza, Bridge&Tunnel,parking lot, construction site and so on.
Rated power: 500W
Rated voltage: 90-240 VAC / 50/60Hz
Driver Power factory: ≥0.95
Driver Efficiency: >0.88
LED Type: SMD LED 3030
CRI: Ra>70
Efficacy: 130-145lm/W
Beam angle:15°/30°
IP Rating: IP65
Installations: Bracket Mount
1. Streamline exterior design, beautiful appearance. Environment friendly ,energy saving .
2. ADC12 Diecasting aluminum body.Salt spray resistant, corrosive resistant,processed with dedicated treatments on the heat sink,
can withstand corrosive and salt intensive environments.
3. No mercury and xenon and other harmful elements, recyclable, no electromagnetic interference.
4. Advanced thermal design, aluminum die casting and extrusion molding combined with thermal contact resistance, high thermal efficiency.
5. Super bright Lumileds chip light source, high luminous efficiency, high color rendering index;Lamp output lumen efficiency reach
160lm/w to 170lm/w.
6. Protection grade reaches IP66, Anti-level 17 hurricane, and IK10 impact proof.
Par NO Parameter | DG-SP500PC3 | DG-SP500NC3 | DG-SP500WC3 |
Sysem consumption | ≤505W | ≤505W | ≤505W |
Color Temperature(CCT) | 5000-6500k | 4000-4500k | 2700-3200k |
Luminous Flux | 71500 lm | 69500 lm | 63000 lm |
Lumious efficiency | 143 LM/W | 139 LM/W | 126 LM/W |
System Efficiency | >90% | >90% | >90% |
Beam Angle | 15°/30° | 15°/30° | 15°/30° |
LED type | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER |
LED QTY | 736 pcs | 736 pcs | 736 pcs |
Color Rendering Index(Ra) | >70 | >70 | >70 |
Working Temperature | -20 ~ 50 ℃ | -20 ~ 50 ℃ | -20 ~ 50 ℃ |
Product Size | Φ480X366mm | Φ480X366mm | Φ480X366mm |
Input voltage | AC100V~240V 50/60HZ | ||
Input Current | AC 1.91A / AC220V | ||
Driver | MEAN WELL / OTHER | ||
Lamp Body Material | Aluminum + PC cover | ||
Lifespan(hrs) | >50000 | ||
IP Rating | IP66 |
Step1. Ensure all power disconnected and turn off the power switch.
Step2. According to the dimension of bracket hole,drill the holes on
the mounting surface and enable it to support over 3 times weight
of the lamp. Install the screw,then lock the bracket with screws.
Step3. Loosen the screws at both ends of the bracket,adjust the light to
appropriate angle and then lock screws.
Step4. Connect the input cables of lamp to power supply mains and
wrap up the cables with insulated sleeve.
Step5. Switch on the power, the lamp will light on. Refer to the figure below.
In case of any abnormal phenomenon or problem, please switch off
the power supply then contact with Genice customer service center.
3F,9th Building, Yuanling Industrial Park, YuanLing Rd, ShiYan Town,BaoAn District, ShenZhen, Guangdong, China
+86 13425165870
info@dgalux.com
Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号
Technical Support:DIGUAN