1.  High density die-casting aluminum housing,clear durable tempered glass front, anti-corrosion & anti-oxidation,                  measured by 200 hours salt test,housing has excellent corrosion resistance.

      2.  IP65 waterproof, shock resistant fixture,can be widely used as landscape lighting outdoor for building,villa,bridge,                gardens,hotels,museum.

      3.  Massive fins for efficient cooling technology, rapidly transfer the heat of the LED chips to the massive fins.

      4.  Safe and easy for installation and maintenance.

      5.  NO UV and near-IR radiation in the light beam.

      6.  Lamp body rotation for 270° flexible installation, flood projecting and spot projecting performable.

 Installation(Suspended ceiling installation\Horizontal installation\Vertical installation\Any angle installation)

         Step1. Ensure all power disconnected and turn off the power switch.

         Step2. According to the dimension of bracket hole,drill the holes on the mounting surface and enable it to support

     over 3 times weight of the lamp. Install the expansion screw,then lock the screws.

         Step3. Loosen screws,adjust the bracket to appropriate angle and then lock screws.

         Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.

         Step5. Switch on the power, the lamp will light on. Refer to the figure below.