Slimline LED Flood Light is widely used in shopping mall, exhibition hall, parking lot, playground,gymnasium, billboards, park, sculpture, national green lighting project,building facade and public corridor, stair corridor lighting.
Rated power: 200W
Rated voltage: 90-240 VAC / 50/60Hz
Driver Power factory: ≥0.95
Driver Efficiency: >0.88
LED Type: SMD LED 3030 / SMD LED 5050
CRI: Ra>70
Efficacy: 130-180lm/W
Beam angle:8°/15°/35°/60°/90°
IP Rating: IP65
Installations: Bracket Mount
1. Integrative design for heat sink and housing,The LED is closely connected to the surface. The heat from the LED is removed through the heat dissipation wing and also by air ventilation.
2. The surface is passed through anodic oxidation treatment.Its structure is compact and beautiful. It can meet the requirement of IP65. It has good capacity like antisepticising,waterproofing, and dust Prevention.
3. Aluminium alloy diecast baking varnish heat sink, clear durable tempered glass front, ensures good heat dissipation.
4. Safe and easy for installation and maintenance.
5. NO UV and near-IR radiation in the light beam.
6. 8° / 15° / 35° / 60° / 90° / 120° multi beam angle for option.
7. Large size aluminum PCB fit aluminum die cast housing, reflector and heat sink integrated.
8. Lamp body rotation for 270° flexible installation, flood projecting and spot projecting performable.
Par NO Parameter | DG-FL200PA | DG-FL200NA | DG-FL200WA |
Sysem consumption | ≤202W | ≤202W | ≤202W |
Color Temperature(CCT) | 5000-6500k | 4000-4500k | 2700-3200k |
Luminous Flux | 27200 lm | 26000 lm | 23800 lm |
Lumious efficiency | 136 LM/W | 130 LM/W | 119 LM/W |
System Efficiency | ＞90% | ＞90% | ＞90% |
Beam Angle | 8°/15°/35°/60°/90° | 8°/15°/35°/60°/90° | 8°/15°/35°/60°/90° |
LED type | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER |
LED QTY | 175 | 175 | 175 |
Color Rendering Index(Ra) | ＞70 | ＞70 | ＞70 |
Working Temperature | -20 ~ 50 ℃ | -20 ~ 50 ℃ | -20 ~ 50 ℃ |
Product Size | 470X360X60 mm | 470X360X60 mm | 470X360X60 mm |
Installation(Suspended ceiling installation\Horizontal installation\Vertical installation\Any angle installation)
Step1. Ensure all power disconnected and turn off the power switch.
Step2. According to the dimension of bracket hole,drill the holes on the mounting surface and enable it to support
over 3 times weight of the lamp. Install the expansion screw,then lock the screws.
Step3. Loosen screws,adjust the bracket to appropriate angle and then lock screws.
Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.
Step5. Switch on the power, the lamp will light on. Refer to the figure below.
3F,9th Building, Yuanling Industrial Park, YuanLing Rd, ShiYan Town,BaoAn District, ShenZhen, Guangdong, China
+86 13425165870
info@dgalux.com
Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号
Technical Support：DIGUAN
English
English
Español
Português
Français
にほんご
Deutsch
Back
Previous
Next
Online Service 2
