LED Stadium Light can be used in parallel with multiple modules, widely used in tennis court, sports venue,gymnasium, large stadiums,plaza,park, garden, building facade,plaza, Bridge＆Tunnel,parking lot, construction site and so on.
Rated power: 500W
Rated voltage: 90-240 VAC / 50/60Hz
Driver Power factory: ≥0.95
Driver Efficiency: >0.88
LED Type: SMD LED 3030 / SMD LED 5050
CRI: Ra>70
Efficacy: 130-160lm/W
Beam angle:7°/15°/30°/60°/90°/120°
IP Rating: IP65
Installations: Bracket Mount
1. Scientifically-designed heat dissipater with much better cooling effect.
2. High performance heat dessipattion,Perfect surface finish:black, grey coating available.
3. There are 7°/ 15°/ 30°/ 60°/ 90°/ 120° beam angle options for sports lighting.
4. High quality power supply, input voltage 100-240V. The power efficiency is more than 90%,
power factor greater than 0.98, UL compulsory certification.
5. For the traditional light source such as the High Pressure Sodium, if the voltage fluctuation ±7%, the brightness and lifetime will be reduced very fast, but for LED light, even the voltage fluctuation is ±20%, the brightness and lifetime will not be influenced at all.Over Current, Over Voltage, Over Heat, Thunder Protection.
6. The CCT of Warm white、Neutral white、Pure white to meet the needs of different occasions, eliminated the low color temperature of
the sodium lamp which cause the depressed mood, observers will feel more comfortable.
Par NO Parameter | DG-SP500PA5 | DG-SP500NA5 | DG-SP500WA5 |
Sysem consumption | ≤505W | ≤505W | ≤505W |
Color Temperature(CCT) | 5000-6500k | 4000-4500k | 2700-3200k |
Luminous Flux | 75000 lm | 73000 lm | 68500 lm |
Lumious efficiency | 150 LM/W | 146 LM/W | 137 LM/W |
System Efficiency | ＞90% | ＞90% | ＞90% |
Beam Angle | 7°/15°/30°/60°/90°/120° | 7°/15°/30°/60°/90°/120° | 7°/15°/30°/60°/90°/120° |
LED type | LUXEON 5050 / OTHER | LUXEON 5050 / OTHER | LUXEON 5050 / OTHER |
LED QTY | 300 pcs | 300 pcs | 300 pcs |
Color Rendering Index(Ra) | ＞70 | ＞70 | ＞70 |
Working Temperature | -20 ~ 50 ℃ | -20 ~ 50 ℃ | -20 ~ 50 ℃ |
Product Size | 637X462X264 mm | 637X462X264 mm | 637X462X264 mm |
LUXEON 5050 LUXEON 3030 2D | |||
Par NO Parameter | DG-SP500PA3 | DG-SP500NA3 | DG-SP500WA3 |
Sysem consumption | ≤505W | ≤505W | ≤505W |
Color Temperature(CCT) | 5000-6500k | 4000-4500k | 2700-3200k |
Luminous Flux | 65000 lm | 63500 lm | 59000 lm |
Lumious efficiency | 130 LM/W | 127 LM/W | 118 LM/W |
System Efficiency | ＞90% | ＞90% | ＞90% |
Beam Angle | 7°/15°/30°/60°/90°/120° | 7°/15°/30°/60°/90°/120° | 7°/15°/30°/60°/90°/120° |
LED type | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER |
LED QTY | 600 pcs | 600 pcs | 600 pcs |
Color Rendering Index(Ra) | ＞70 | ＞70 | ＞70 |
Working Temperature | -20 ~ 50 ℃ | -20 ~ 50 ℃ | -20 ~ 50 ℃ |
Product Size | 637X462X264 mm | 637X462X264 mm | 637X462X264 mm |
Step1. Ensure all power disconnected and turn off the power switch.
Step2. According to the dimension of bracket hole,drill the holes on the mounting surface and enable it to support
over 3 times weight of the lamp. Install the screw,then lock the bracket with screws.
Step3. Loosen the screws at both ends of the bracket,adjust the light to appropriate angle and then lock screws.
Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.
Step5. Switch on the power, the lamp will light on. Refer to the figure below.
In case of any abnormal phenomenon or problem, please switch off the power supply then contact with Genice customer service center.
9th floor,4 Bldg,Bake Industrial Park, NO.345 Changfeng Road,Changzhen Community, Guangming District,Shenzhen,Guangdong,China
86 0755 8888888
info@dgalux.com
Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号
Technical Support：Website Construction
にほんご
English
Español
Português
Français
にほんご
Deutsch
戻る
前
後
Online Service 2
