Slimline LED Flood Light is cost-effective solution to be widely used in exhibition hall, parking lot, playground,billboards, park, sculpture, building facade and public corridor and other indoor and outdoor lighting.
Rated power: 50W
Rated voltage: 90-240 VAC / 50/60Hz
Driver Power factory: ≥0.95
Driver Efficiency: >0.88
LED Type: SMD LED 3030
CRI: Ra>70
Efficacy: 138lm/W
Beam angle:120°
IP Rating: IP65
Installations: Bracket Mount
1. Aluminium alloy diecast baking varnish heat sink, clear temprered glass, ensures good heat dissipation.It has good capacity like antisepticising, waterproofing, and dust Prevention.
2. Use toughened glass and the light transmittance is about 93%.
3. High heat conductivity,low luminous decay,pure light color and no ghosting.
4. IP65 waterproof, shock resistant fixture,can be widely used as landscape lighting outdoor for building,villa,bridge, gardens,hotels,museum.
5. Massive fins for efficient cooling technology, rapidly transfer the heat of the LED chips to the massive fins.
Par NO Parameter | DG-FL050PH | DG-FL050NH | DG-FL050WH |
Sysem consumption | ≤52W | ≤52W | ≤52W |
Color Temperature(CCT) | 5000-6500k | 4000-4500k | 2700-3200k |
Luminous Flux | 6500 lm | 6300 lm | 5900 lm |
Lumious efficiency | 130 LM/W | 126 LM/W | 118 LM/W |
System Efficiency | ＞90% | ＞90% | ＞90% |
Beam Angle | 120° | 120° | 120° |
LED type | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER |
LED QTY | 70 | 70 | 70 |
Color Rendering Index(Ra) | ＞70 | ＞70 | ＞70 |
Working Temperature | -20 ~ 50 ℃ | -20 ~ 50 ℃ | -20 ~ 50 ℃ |
Product Size | 220X198X43 mm | 220X198X43 mm | 220X198X43 mm |
Installation(Suspended ceiling installation\Horizontal installation\Vertical installation\Any angle installation)
Step1. Carefully remove the Slimline Flood Light from the packaging. Loosen the bolts on each side of the Slimline Flood Light.
Step2. According to the dimension of bracket hole, Select a suitable mounting position ,drill the holes on the mounting surface and enable it to support over 3 times weight of the lamp. Screw the bracket onto the mounting surface using suitable wall plugs and screws.
Step3. Adjust the bracket to appropriate angle and then lock screws.
Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.
Step5. Switch on the power, the lamp will light on. Refer to the figure below.
9th floor,4 Bldg,Bake Industrial Park, NO.345 Changfeng Road,Changzhen Community, Guangming District,Shenzhen,Guangdong,China
86 0755 8888888
info@dgalux.com
Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号
Technical Support：Website Construction
にほんご
English
Español
Português
Français
にほんご
Deutsch
戻る
前
後
Online Service 2
