Slimline Flood Light is the maintenance-free and cost-effective solution to be widely used in shopping mall, exhibition hall, parking lot, playground,gymnasium, billboards, park, building facade and public corridor and other indoor and outdoor lighting.
Rated power: 80W
Rated voltage: 90-240 VAC / 50/60Hz
Driver Power factory: ≥0.95
Driver Efficiency: >0.88
LED Type: SMD LED 3030 / SMD LED 5050
CRI: Ra>70
Efficacy: 130-180lm/W
Beam angle:120°
IP Rating: IP65
Installations: Bracket Mount
1. High density die-casting aluminum housing,clear durable tempered glass front, anti-corrosion & anti-oxidation, measured by 200 hours salt test,housing has excellent corrosion resistance.
2. IP65 waterproof, shock resistant fixture,can be widely used as landscape lighting outdoor for building,villa,bridge, gardens,hotels,museum.
3. Massive fins for efficient cooling technology, rapidly transfer the heat of the LED chips to the massive fins.
4. Safe and easy for installation and maintenance.
5. NO UV and near-IR radiation in the light beam.
6. Lamp body rotation for 270° flexible installation, flood projecting and spot projecting performable.
Par NO Parameter | DG-FL080PE | DG-FL080NE | DG-FL080WE |
Sysem consumption | ≤82W | ≤82W | ≤82W |
Color Temperature(CCT) | 5000-6500k | 4000-4500k | 2700-3200k |
Luminous Flux | 10880 lm | 10720 lm | 9840 lm |
Lumious efficiency | 138 LM/W | 134 LM/W | 123 LM/W |
System Efficiency | ＞90% | ＞90% | ＞90% |
Beam Angle | 120° | 120° | 120° |
LED type | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER |
LED QTY | 80 | 80 | 80 |
Color Rendering Index(Ra) | ＞70 | ＞70 | ＞70 |
Working Temperature | -20 ~ 50 ℃ | -20 ~ 50 ℃ | -20 ~ 50 ℃ |
Product Size | 364X264X58 mm | 364X264X58 mm | 364X264X58 mm |
Installation(Suspended ceiling installation\Horizontal installation\Vertical installation\Any angle installation)
Step1. Ensure all power disconnected and turn off the power switch.
Step2. According to the dimension of bracket hole,drill the holes on the mounting surface and enable it to support
over 3 times weight of the lamp. Install the expansion screw,then lock the screws.
Step3. Loosen screws,adjust the bracket to appropriate angle and then lock screws.
Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.
Step5. Switch on the power, the lamp will light on. Refer to the figure below.
9th floor,4 Bldg,Bake Industrial Park, NO.345 Changfeng Road,Changzhen Community, Guangming District,Shenzhen,Guangdong,China
86 0755 8888888
info@dgalux.com
Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号
Technical Support：Website Construction
にほんご
English
Español
Português
Français
にほんご
Deutsch
戻る
前
後
Online Service 2
