Slimline LED Flood Light is widely used in shopping mall, exhibition hall, parking lot, playground,gymnasium, billboards, park, sculpture, national green lighting project,building facade and public corridor, stair corridor lighting.
Rated power: 100W
Rated voltage: 90-240 VAC / 50/60Hz
Driver Power factory: ≥0.95
Driver Efficiency: >0.88
LED Type: SMD LED 3030 / SMD LED 5050
CRI: Ra>70
Efficacy: 130-180lm/W
Beam angle:30°/60°/90°/140°
IP Rating: IP65
Installations: Bracket Mount
1. Ultra slim design, fashion and classic. Full aluminum whole lamp radiator technology, pefect efficiently solve the problem of the led heat dissipation, greatly extend the life of the light source.
2. Innovative G-buckle technology, stop glass detaching, free of screw fixing, elegant appearance, easy to install.
3. Large size aluminum PCB fit die-casting aluminum housing, reflector and heat sink integrated.
4. Uses high thermal conductivity aluminum plate, reducing the temperature difference between light source and radiator,improve reliability.
5. Stainless waterproof connectors for input cable connection, IP65 waterproof, shock resistant fixture,can be widely used as landscape lighting outdoor for building,villa,bridge, gardens,hotels,museum.
6. Explosion-proof glass, high light transmittance rate and good protect LEDs.
7. 30° / 60° / 90° / 140° multi beam angle for option.
Par NO Parameter | DG-FL100PC | DG-FL100NC | DG-FL100WC |
Sysem consumption | ≤102W | ≤102W | ≤102W |
Color Temperature(CCT) | 5000-6500k | 4000-4500k | 2700-3200k |
Luminous Flux | 12500 lm | 12000 lm | 11000 lm |
Lumious efficiency | 125 LM/W | 120 LM/W | 110 LM/W |
System Efficiency | ＞90% | ＞90% | ＞90% |
Beam Angle | 30°/60°/90°/140° | 30°/60°/90°/140° | 30°/60°/90°/140° |
LED type | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER | LUXEON 3030 / OTHER |
LED QTY | 128 | 128 | 128 |
Color Rendering Index(Ra) | ＞70 | ＞70 | ＞70 |
Working Temperature | -20 ~ 50 ℃ | -20 ~ 50 ℃ | -20 ~ 50 ℃ |
Product Size | 403X295X60 mm | 403X295X60 mm | 403X295X60 mm |
Installation(Suspended ceiling installation\Horizontal installation\Vertical installation\Any angle installation)
Step1. Ensure all power disconnected and turn off the power switch.
Step2. According to the dimension of bracket hole,drill the holes on the mounting surface and enable it to support
over 3 times weight of the lamp. Install the expansion screw,then lock the screws.
Step3. Loosen screws,adjust the bracket to appropriate angle and then lock screws.
Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.
Step5. Switch on the power, the lamp will light on. Refer to the figure below.
9th floor,4 Bldg,Bake Industrial Park, NO.345 Changfeng Road,Changzhen Community, Guangming District,Shenzhen,Guangdong,China
86 0755 8888888
info@dgalux.com
Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号
Technical Support：Website Construction
にほんご
English
Español
Português
Français
にほんご
Deutsch
戻る
前
後
Online Service 2
