LED Flood Light is the maintenance-free and cost-effective solution to be widely used in parking lot, playground,gymnasium, park, national green lighting project,building facade and public corridor, stair corridor and other indoor and outdoor lighting.
Rated power: 200W
Rated voltage: 90-240 VAC / 50/60Hz
Driver Power factory: ≥0.95
Driver Efficiency: >0.88
LED Type: SMD LED 3030 / SMD LED 5050
CRI: Ra>70
Efficacy: 130-180lm/W
Beam angle:140°
IP Rating: IP65
Installations: Bracket Mount
1. Perfect Light Distribution Solution：Adoption of integrated shell optic lens, enhance the brightness and illumination uniformity, there are 60°, 90°,140° beam angle options for the Lens.
2. Scientifically-designed heat dissipater with much better cooling effect.
3. High luminous efficiency， Whole lamp output light efficiency >160LM/W.
4. High quality power supply, input voltage 100-240V. The power efficiency is more than 90%, power factor greater than 0.98.
5. Impact Resistance, Shock-proof, Without Ultraviolet (UV) and Infrared (IR) Radiation: No filament and glass frames, avoid break of the traditional lamp.without harm to the human body.
6. Stainless waterproof connectors for input cable connection, IP65 waterproof, shock resistant fixture,can be widely used as landscape lighting outdoor for building,villa,bridge, gardens,hotels,museum.
Par NO Parameter | DG-FL200PK | DG-FL200NK | DG-FL200WK |
Sysem consumption | ≤202W | ≤202W | ≤202W |
Color Temperature(CCT) | 5000-6500k | 4000-4500k | 2700-3200k |
Luminous Flux | 33000 lm | 32400 lm | 30200 lm |
Lumious efficiency | 165 LM/W | 162 LM/W | 151 LM/W |
System Efficiency | ＞90% | ＞90% | ＞90% |
Beam Angle | 60°/90°/140° | 60°/90°/140° | 60°/90°/140° |
LED type | LUXEON 3030 / 5050 | LUXEON 3030 / 5050 | LUXEON 3030 / 5050 |
LED QTY | 3030:288 / 5050:72 | 3030:288 / 5050:72 | 3030:288 / 5050:72 |
Color Rendering Index(Ra) | ＞70 | ＞70 | ＞70 |
Working Temperature | -20 ~ 50 ℃ | -20 ~ 50 ℃ | -20 ~ 50 ℃ |
Product Size | 544X378X75 mm | 544X378X75 mm | 544X378X75 mm |
Installation(Suspended ceiling installation\Horizontal installation\Vertical installation\Any angle installation)
Step1. Ensure all power disconnected and turn off the power switch.
Step2. According to the dimension of bracket hole,drill the holes on the mounting surface and enable it to support
over 3 times weight of the lamp. Install the expansion screw,then lock the screws.
Step3. Loosen screws,adjust the bracket to appropriate angle and then lock screws.
Step4. Connect the input cables of lamp to power supply mains and wrap up the cables with insulated sleeve.
Step5. Switch on the power, the lamp will light on. Refer to the figure below.
9th floor,4 Bldg,Bake Industrial Park, NO.345 Changfeng Road,Changzhen Community, Guangming District,Shenzhen,Guangdong,China
86 0755 8888888
info@dgalux.com
Copyright ©Shenzhen Diguan Electronic Technology Co., Ltd. All Rights Reserved 粤ICP备15111号
Technical Support：Website Construction
にほんご
English
Español
Português
Français
にほんご
Deutsch
戻る
前
後
Online Service 2
